The
Water Treatment Equipment operates non-stop every day. In order to ensure the normal operation of each device and achieve good results in the treated water, the equipment should be regularly maintained and repaired.
1、 The daily maintenance of water treatment equipment can be started from the following aspects:
1） Check the fasteners and control devices to ensure safety and reliability.
2） Check and adjust necessary components, adjust the clearance of moving parts, and replace vulnerable parts.
3） Clean, inspect, and adjust the electrical components. Check for good electrical contact and secure wiring.
4） Thoroughly clean and wipe the dead corners on the internal and external surfaces of the equipment, and remove any active burrs on the surface.
5） If necessary, disassemble, inspect, adjust, and repair parts of the equipment.
6） Maintenance should achieve a clean appearance, natural color, smooth oil flow, clean and bright oil, and good lubrication. The equipment operates flexibly and operates normally.
2、 There are several methods for cleaning water treatment equipment:
1） Low pressure flushing technology cleaning method
In daily life, while using purified water equipment, we also need to flush the equipment, as prolonged use can cause contamination of the purified water equipment and prevent it from working properly. We should regularly use low-pressure flushing technology to clean the dirt on the surface of the equipment.
2） Stop Equipment Operation Protection Law
Long term operation of equipment may cause fluctuations in the technology of reverse osmosis pure water equipment. Improper treatment of pure water equipment can lead to a decrease in the membrane performance of the equipment, which may seriously lead to its inability to use. We take protective measures in a short period of time, and stopping equipment operation appropriately is also a method of equipment cleaning and protection.
3） Chemical cleaning method
The membrane surface of pure water equipment is easily covered by some microorganisms or inorganic substances, which can affect its operational ability. Our ideal cleaning time is to clean it every six months. If the pure water equipment needs to be cleaned once a month, it indicates that we need to adjust equipment parameters and improve the pre-treatment system. Therefore, chemical cleaning of the membrane of pure water equipment is also a method of protecting the pure water equipment system.
